Pop Rivet
Rivets · blind rivet · pull rivet
Definition: A pop (blind) rivet is a permanent fastener installed from one side using a tool that pulls a mandrel through the body, expanding it to clamp the joint.
Anatomy
■ Head■ Shank■ Threads■ Point
Governing standards: IFI 114 · IFI 116
Common Sizes
| Inch | Metric | Head width | Head height |
|---|---|---|---|
| 3/32 | 2.4 mm | 1/4 | — |
| 1/8 | 3.2 mm | 1/4 | — |
| 3/16 | 4.8 mm | 3/8 | — |
Representative sizes. Full dimensional data lives in the standards listed below.
Grades & Strength
| Grade | Material | Tensile (psi) | Marking |
|---|---|---|---|
| Aluminum body / steel mandrel | aluminum + steel | — | None |
| Stainless body / stainless mandrel | 304 stainless | — | None |
Materials
- Aluminum body / steel mandrel
- Stainless steel
- Steel
- Copper
Pros & Cons
Pros
- Installable from one side — ideal for blind joints
- Fast, consistent installation
- No heat or threads to strip
Cons
- Permanent — must be drilled out to remove
- Lower clamp strength than a bolted joint
- Requires a dedicated rivet tool
Typical Uses
- Sheet metal and ductwork
- Gutters and downspouts
- Automotive trim
- Applications with one-sided access
Alternatives & Related
- Rivet Nut — Creates a reusable threaded hole instead of a permanent joint
- Self-Tapping Screw — Removable sheet-metal fastening
Where to Buy
Affiliate links — we may earn a commission at no cost to you.
FAQ
How does a pop rivet work?
The tool pulls the mandrel through the body. The mandrel head expands the body behind the workpiece, then the mandrel snaps at its break point, leaving a flush, permanent clamp.
What size pop rivet should I use?
The grip range must span the total material thickness. Choose a body diameter about 1/8 in. smaller than the hole, and match body material to the workpiece to avoid corrosion.