Ring Shank Nail
Nails & Construction Fasteners · annular ring nail · ring nail · grip nail
Definition: A ring shank nail has concentric ridges along the shank that lock into wood fibers, greatly increasing pull-out resistance for decking and sheathing.
Anatomy
■ Head■ Shank■ Point
Governing standards: ASTM F1667
Common Sizes
| Inch | Metric | Head width | Head height |
|---|---|---|---|
| 8d · 2-1/2 in | — | 9/32 | — |
| 16d · 3-1/2 in | — | 11/32 | — |
| 20d · 4 in | — | 13/32 | — |
Representative sizes. Full dimensional data lives in the standards listed below.
Grades & Strength
| Grade | Material | Tensile (psi) | Marking |
|---|---|---|---|
| Bright (plain) | low carbon steel | — | Interior sheathing |
| Galvanized | zinc-coated steel | — | Decking, exterior |
| Stainless | stainless steel | — | Coastal decking |
Materials
- Steel (bright)
- Galvanized steel
- Stainless steel
Pros & Cons
Pros
- Very high pull-out resistance
- Fights wood movement
- Available for nail guns
Cons
- Hard to remove
- Costs more than smooth nails
- Rings lose grip in very soft wood
Typical Uses
- Decking
- Wall and roof sheathing
- Fencing
- Subflooring
Alternatives & Related
- Common Nail — Standard smooth-shank fastening
- Screw Shank Nail — Spiral shank that twists in
- Deck Screw — Removable, higher hold for decking
Where to Buy
Affiliate links — we may earn a commission at no cost to you.
FAQ
What is a ring shank nail?
A nail with concentric rings on the shank that lock into the wood for far more pull-out resistance than a smooth nail.
Ring shank vs screw shank nail?
Ring shanks resist pull-out; screw (spiral) shanks twist into the wood as they are driven, holding in dense and seasoned lumber.